(0) Item Hello, Guest
Velotech 12A ESC Set one With BEC and one No BEC

Velotech 12A ESC Set one With BEC and one No BEC

review
0
0
5
Your Price: $23.00
In Stock - Ships in 1 to 2 buisness days
Part Number:ESC-VLT-12A-SET
ESC#1
This ESC has silicone wires for connection to a motor. If you prefer to the one with 2mm bullet connectors please select VLT-20123

This is an improved version with newly designed smaller PCB board and 2mm bullet connectors pre-soldered in the factory. It is one of the smallest 12A multirotor ESCs in the market, making it easy to mount in a limited space. The new version ESC uses the same electronic components as the old one and performs the same.

This is one of the best multirotor ESCs we have tested: quick response, smooth throttle, low running temperature, and high reliability.
This version does not have built-in BEC. There is no need to cut the signal wire for multirotor setup since the product does not have a BEC output.

Featured with high efficiency, all N-channel MOSFET design, jitter-free hardware PWM input, and the most popular SimonK program, Velotech Magic speed controllers are an ideal choice for multirotors.
Quality electronic parts are used to build Velotech Magic speed controllers, such as genuine Japanese Rubycon capacitor, IOR MOS tubes, heavy duty PCB. These parts cost much more than those cheaper counterparts that are frequently found in low price ESCs.
The manufacturing process was strictly controlled and monitored to ensure all electronic parts are properly soldered. Every single ESC was examined in the factory with oscilloscope and other equipments, as well as burn-in test.

This product is warranted for six month from the date of purchase to be free from manufacturing and component defects. Limited warranty is handled by Buddy RC at Columbus, Ohio.

Specifications:
Continuous Current: 12A
Voltage Range: 2-4S LiPo
BEC Output: 1A
Refresh Rate: 600Hz
Motor Wires: 18 gauge soft silicone wires
Battery Wires: 18 gauge soft silicone wires
Weight: 14g (approx. including wires)
Dimensions: 38x21x8mm (approx. including capacitor)
Bootloader: SimonK
Firmware: afro

ESC#2
This ESC has silicone wires for connection to a motor. If you prefer to the one with 2mm bullet connectors please select VLT-20124

This is an improved version with newly designed smaller PCB board and 2mm bullet connectors pre-soldered in the factory. It is one of the smallest 12A multirotor ESCs in the market, making it easy to mount in a limited space. The new version ESC uses the same electronic components as the old one and performs the same.

This is one of the best multirotor ESCs we have tested: quick response, smooth throttle, low running temperature, and high reliability.


Featured with high efficiency, all N-channel MOSFET design, jitter-free hardware PWM input, and the most popular SimonK program, Velotech Magic speed controllers are an ideal choice for multirotors.
Quality electronic parts are used to build Velotech Magic speed controllers, such as genuine Japanese Rubycon capacitor, IOR MOS tubes, heavy duty PCB. These parts cost much more than those cheaper counterparts that are frequently found in low price ESCs.
The manufacturing process was strictly controlled and monitored to ensure all electronic parts are properly soldered. Every single ESC was examined in the factory with oscilloscope and other equipments, as well as burn-in test.

This product is warranted for six month from the date of purchase to be free from manufacturing and component defects. Limited warranty is handled by Buddy RC at Columbus, Ohio.

Specifications:
Continuous Current: 12A
Voltage Range: 2-4S LiPo
Refresh Rate: 600Hz
BEC none
Motor Wires: 18 gauge soft silicone wires
Battery Wires: 18 gauge soft silicone wires
Weight: 14g (approx. including wires)
Dimensions: 38x21x8mm (approx. including capacitor)