Like its little brother, the McFoamy XL is loved by anyone that flies
it. With a full-length spar and increased size, many say it flies more
like a balsa plane than a foamy. But with the "bounceability" of EPP
foam, your crashes result in little to no damage and can be repaired in
just minutes .
Flight Attributes:
-
Hovering ease
-
Smooth flight
-
3D capability
West Michigan Park Flyers Gets You In The Air FASTER!
WMPF does more pre-assembly for you to get you in the air much faster
than anywhere else! The parts are all cut by CNC laser from 9mm #1.3lb
EPP and have alignment tabs for easier building. The kit has of all the
foam pieces pre-cut, control surfaces pre-beveled and hinges glued. The
aileron servo cutout in the fuselage for a 9 gram servo is pre-cut to
speed assembly. The wing spar slot is pre-cut into the bottom of the
wing and elevator. The spars are installed for you for all but the foam
only kit options. All Hinges and Spars are glued with Beacon Foam Tac
Glue.
Note: We are making unpainted kits to order! Kits can take 3-5 days before they are ready for shipping. We run them in batches, so please understand your order may not go out immediately.
Specs
Wing Span: 39"
Items needed to complete this build. All items can be purchased below.
Note:
- The Sunny Sky 2212-8 1400KV VIII does not have a prop shaft for a prop saver. It is a direct mount and you will have to drill out your prop to fit the 5mm threaded shaft.
- The Sunny Sky A2212-9 1400 KV does have the 3.17 prop shaft and can be used with the 3.17 prop saver / adapter.
