The Tuff Cub is a 3 channel, EPP foam beginner - trainer plane. The wing is a KFm2 airfoil with dihedral tips.
The Tuff Cub came about after having a need for a indoor trainer plane.
It had to be easy to fly and very durable! What I didn't expect was how
well it would fly outside, even in a 10 to 15 mph wind.
The Tuff cub is currently available in an unpainted short kit .
Note: We are a small Mom and Pop manufacturer. We hand craft all of our kits to order one at a time! Kits can take 5-7 days (longer for painted kits) before they are ready for shipping. We run them in batches, so please understand your order may not go out immediately.
The kit includes the following:
Laser Cut foam parts.
Carbon Fiber Spars.
Carbon trussing as well as control rods.
Wooden control Horns.
1/32 Piano WIre for control rods (wire are pre bent)
- Wing span – 32”
- Length – 25”
- Wing area 256 sq in
- Weight - (without battery) 5 oz (with battery) 6 to 7 oz
- Center of gravity is 2 1/2” from front edge of wing.
Needed to complete the build:
- Motor: 2204 - 1480KV or 2208 - 1500kv
- Prop: 8x4DD or 7x3.5DD
- Battery: 460 mah to 800 mah 11.1 V
- Speed Control: 6 Amp
- 5 gram servos, 2 total
Items needed to complete this build. All items can be purchased below.